PrecisionBlast stripped and recoated our two 40-foot storage tanks in three days flat. Their containment was immaculate — nothing escaped into the bayou. I've hired four blasting crews in ten years; these are the only ones I'd call back.
№01
INDUSTRIAL BLAST CLEANING & COATINGS
Every surface stripped bare, every coat built to last.
PrecisionBlast is a working shop and mobile field crew operating out of the Port of Houston corridor. We blast-clean structural steel, storage tanks, marine hulls, loading docks and frame-off automotive projects — then seal them with protective systems that hold up to Gulf Coast weather.
- Projects to date
- 2,400+
- Years in operation
- 18
- Mobile units ready
- 06
- Crew certification
- SSPC-QP
FIELD WORK / BAYTOWN, TX
2008
What we do,
row by row.
Six core service lines. Every job begins with a substrate assessment — because the wrong abrasive on the wrong surface costs more to fix than to do right the first time.
-
01
→
Industrial Sandblasting
Structural steel, tanks, pipelines, heavy equipment. SSPC-SP 5 through SP 10 finishes.
-
02
→
Mobile On-Site Blasting
Six self-contained rigs that roll to your jobsite with containment and recovery on board.
-
03
→
Powder Coating
In-house cure oven up to 8 ft. Uniform mil build on industrial and architectural parts.
-
04
→
Rust & Paint Removal
Corrosion, mill scale and failed coatings stripped without damaging the base metal.
-
05
→
Concrete Surface Prep
CSP 1–9 profiles for coatings, overlays and sealers. Dustless equipment available.
-
06
→
Automotive Restoration
Frame-off stripping, wheel refinishing and engine component cleaning for classics and customs.
-
STEP / 01
On-site assessment
We walk the job, measure the substrate, check access and containment constraints, and photograph everything for the file.
-
STEP / 02
Written, line-itemed estimate
Labor, media, containment, disposal, and schedule — all itemized. No vague allowances, no surprise line items after the fact.
-
STEP / 03
Controlled execution
OSHA-trained operators, full containment, recyclable media where possible, and daily progress notes sent to your project inbox.
-
STEP / 04
Inspection & handover
Joint walkthrough with the spec sheet in hand. Coating records, DFT readings, and a maintenance schedule go into your project binder.
98.2%On-time completion
150miMobile service radius
0OSHA recordables (last 4 yrs)
24hrEstimate turnaround
What clients say after the dust settles.
I run a restoration shop — I've used a lot of blasters. These are the only ones who consistently hit a uniform 2-mil profile on sheet metal without warping the panel. That's not marketing, that's just the result.
A failed coating on our loading dock that three other contractors couldn't diagnose. PrecisionBlast found the moisture problem in about an hour and spec'd the fix. Fourteen months on, it hasn't moved.
We shut a production line for a Friday-through-Sunday window. They were on site Thursday night with the containment up, done by 2 PM Sunday, and the line ran clean Monday morning. That's the whole review.
01 / 04
[ COVERAGE ]
Headquartered in Houston.
Headquartered in Houston.
On the road across the Gulf.
Our yard sits two minutes from the 610 East Loop. Six mobile rigs deploy daily within a 150-mile radius — from Galveston up through The Woodlands, west to Katy, and out toward Beaumont.
Full coverage map →
[ NEXT STEP ]
Let's look at the surface
Let's look at the surface
in person.
We'll come out, walk the job, and put a real number on it. No obligation, no pressure, no sales script.
Or email [email protected] — we answer within one business day.
